Universal K20A2 KSwap Loom

*****CURRENTLY 2-3 WEEK DELIVERY FROM POINT OF ORDER*****

The relays attached are for the main relay and fuel pump (fan relay can be added at extra cost see drop down menu)

Fuel and Fan relays come wired with cable that can run up to 15amp. This is perfect for a standard fuel pump or up to a Walbro 255 (or equivalent), and up to a 12” fan (if unsure please email model and I’ll confirm). If higher current rating is required please see our other products which come with 25amp cable.

The plugs you see connect to the engine harness grey plug and the white is the ecu “e” plug.

Only a few simple connections required to get a Honda K series engine up and running in any chassis.

The only other things required are the engine loom and charge harness

Comes complete with ODB connector for scanning ecu and UKDM wired primary O2 sensor

Outputs for:
Speed
Rpm
Mil warning
Charge warning
Oil warning
Fan activation

If you’re using standard EP3 (Honda Civic Type R 2001-2006) clocks then we offer pre terminated connectors for them. By adding cluster connections the above facilities will be shown on the dash, and also engine coolant temp. As part of the wiring we remove ABS and SRS warnings